Mitsubishi MMES User Manual Download Page 57

Page: 57 / 135

2. The list of Favorite destinations is

displayed.

3. Tap the Favorite that you want to edit. If

necessary, browse down to see more of

the list or tap

and enter

a few letters from the name of the Favorite
destination.

4. A full screen map appears with the

selected point in the middle.

5. Tap

to see the details of the selected

Place.

6. Tap

and modify its

content.

7. Tap and hold

to return

to the map.

Saving a map location as
an alert point

You can save any map location as an alert
point (for example a railroad crossing). By
default, this is disabled. You can use it by
changing the setting (page 64).

1. Browse the map and select a location. The

red Cursor appears there.

2. Tap

3. Scroll down the list and tap

4. On the newly opened screen, select

the type of the alert point, the direction
from which you expect the alert, and (if
applicable) the speed limit for this alert
point.

5. Tap

to save the

location as a new alert point.

Editing an alert point

You can edit a previously saved or uploaded
alert point (for example a railroad crossing).

1. Browse the map and select the alert point

to edit. The red circle appears around the
alert point.

2. Tap

3. Scroll down the list and tap

4. On the newly opened screen, modify the

type of the alert point, the direction from
which you expect the alert, or (if applicable)
the speed limit for this alert point.

205-0010-00_QY-7375M-A_EN.indb 57

3/12/2013 9:57:23 AM

Summary of Contents for MMES








































































































































Search results

Summary of Contents for MMES

Reviews:

Mitsubishi MMES, User Manual, Page: 57 / 135

Search results

Summary of Contents for MMES

Reviews: