manualshive.com logo in svg

Mitsubishi MELSEC iQ-R series, User Manual

The Mitsubishi MELSEC iQ-R series offers state-of-the-art automation solutions for various industries. Enhance your production processes with this advanced control system. Access its comprehensive user manual for free download from manualshive.com. Maximize your user experience and optimize operations with this cutting-edge technology.

Share
Download
background image

81

WARRANTY

Please confirm the following product warranty details before using this product.

1. Gratis Warranty Term and Gratis Warranty Range

If any faults or defects (hereinafter "Failure") found to be the responsibility of Mitsubishi occurs during use of the product 
within the gratis warranty term, the product shall be repaired at no cost via the sales representative or Mitsubishi Service 
Company.
However, if repairs are required onsite at domestic or overseas location, expenses to send an engineer will be solely at 
the customer's discretion.  Mitsubishi shall not be held responsible for any re-commissioning, maintenance, or testing 
on-site that involves replacement of the failed module.
[Gratis Warranty Term]
The gratis warranty term of the product shall be for one year after the date of purchase or delivery to a designated place.
Note that after manufacture and shipment from Mitsubishi, the maximum distribution period shall be six (6) months, and 
the longest gratis warranty term after manufacturing shall be eighteen (18) months. The gratis warranty term of repair 
parts shall not exceed the gratis warranty term before repairs.
[Gratis Warranty Range]

(1)  The range shall be limited to normal use within the usage state, usage methods and usage environment, etc., which 

follow the conditions and precautions, etc., given in the instruction manual, user's manual and caution labels on the 
product.

(2)  Even within the gratis warranty term, repairs shall be charged for in the following cases.

1.  Failure occurring from inappropriate storage or handling, carelessness or negligence by the user. Failure caused 

by the user's hardware or software design.

2.  Failure caused by unapproved modifications, etc., to the product by the user.
3.  When the Mitsubishi product is assembled into a user's device, Failure that could have been avoided if functions 

or structures, judged as necessary in the legal safety measures the user's device is subject to or as necessary by 
industry standards, had been provided.

4.  Failure that could have been avoided if consumable parts (battery, backlight, fuse, etc.) designated in the 

instruction manual had been correctly serviced or replaced.

5.  Failure caused by external irresistible forces such as fires or abnormal voltages, and Failure caused by force 

majeure such as earthquakes, lightning, wind and water damage.

6.  Failure caused by reasons unpredictable by scientific technology standards at time of shipment from Mitsubishi.
7.  Any other failure found not to be the responsibility of Mitsubishi or that admitted not to be so by the user.

2. Onerous repair term after discontinuation of production

(1)  Mitsubishi shall accept onerous product repairs for seven (7) years after production of the product is discontinued. 

Discontinuation of production shall be notified with Mitsubishi Technical Bulletins, etc.

(2)  Product supply (including repair parts) is not available after production is discontinued.

3. Overseas service

Overseas, repairs shall be accepted by Mitsubishi's local overseas FA Center. Note that the repair conditions at each FA 
Center may differ.

4. Exclusion of loss in opportunity and secondary loss from warranty liability

Regardless of the gratis warranty term, Mitsubishi shall not be liable for compensation to:

(1)  Damages caused by any cause found not to be the responsibility of Mitsubishi.
(2)  Loss in opportunity, lost profits incurred to the user by Failures of Mitsubishi products.
(3)  Special damages and secondary damages whether foreseeable or not, compensation for accidents, and 

compensation for damages to products other than Mitsubishi products.

(4)  Replacement by the user, maintenance of on-site equipment, start-up test run and other tasks.

5. Changes in product specifications

The specifications given in the catalogs, manuals or technical documents are subject to change without prior notice.

Summary of Contents for MELSEC iQ-R series























































































Reviews:

No comments

Related manuals for MELSEC iQ-R series

Walchem W100 Troubleshooting Manual preview
W100
Brand: Walchem Pages: 10
Hankscraft Runxin HD Series Service Manual preview
HD Series
Brand: Hankscraft Runxin Pages: 53
Waterway OASIS Instruction Manual preview
OASIS
Brand: Waterway Pages: 16
Patron Buggy User Instructions preview
Buggy
Brand: Patron Pages: 17
Zeta Premier MX-16 Installation And Commissioning Manual preview
Premier MX-16
Brand: Zeta Pages: 44
Jäger ADwin HSM-24V Manual preview
ADwin HSM-24V
Brand: Jäger Pages: 18
Trane EDAB 1106A Technical Manual preview
EDAB 1106A
Brand: Trane Pages: 72
MaintTech CX300 User Manual preview
CX300
Brand: MaintTech Pages: 28
oventrop 2104203 Operating Instructions Manual preview
2104203
Brand: oventrop Pages: 64
Grundfos IO 401 Installation And Operating Instructions Manual preview
IO 401
Brand: Grundfos Pages: 20
EFI E-42 Installation And Service Manual preview
E-42
Brand: EFI Pages: 127
maxxess eMAX-EP4502 Installation Manual preview
eMAX-EP4502
Brand: maxxess Pages: 11
SOLARJACK PVA 5-30 User Manual preview
PVA 5-30
Brand: SOLARJACK Pages: 14
GE Entelli-Switch 250 Operation And Maintenance Manual preview
Entelli-Switch 250
Brand: GE Pages: 32
PrimaLuceLab EAGLE CORE PLUS Manual preview
EAGLE CORE PLUS
Brand: PrimaLuceLab Pages: 40
Wavelength Electronics PTC5000 Datasheet And Operating Manual preview
PTC5000
Brand: Wavelength Electronics Pages: 17
Banner DX99N9X1S2N0M2X0D2 Manual preview
DX99N9X1S2N0M2X0D2
Brand: Banner Pages: 13
Tescom RM2020 Installation And User Manual preview
RM2020
Brand: Tescom Pages: 15

Brands by name

Popular brands

Load more brands