Mitsubishi MELSEC iQ-R series, User Manual

Page: 27 / 86

4 PROCEDURES BEFORE OPERATION
25
4
4
PROCEDURES BEFORE OPERATION
This chapter describes the procedures before operation.
1.
Mounting modules
Mount the temperature control module in a desired configuration.

Page 27 SYSTEM CONFIGURATION
2.
Wiring
Wire external devices to the temperature control module.
 Page 29 INSTALLATION AND WIRING
3.
Addition of modules
Use an engineering tool to add the temperature control module to the module configuration. For details, refer to the following.

GX Works3 Operating Manual
4.
Setting parameters
Use an engineering tool to set the parameters of the temperature control module. For details, refer to the following.
 MELSEC iQ-R Temperature Control Module User's Manual (Application)
5.
Execution of auto tuning
To execute the auto tuning, set PID constants with the auto tuning function. For details, refer to the following.
 MELSEC iQ-R Temperature Control Module User's Manual (Application)
Perform a warm-up operation for about 15 minutes before executing the auto tuning.
6.
Programming
Create a program. For details, refer to the following.
 Page 51 OPERATION EXAMPLES
7.
Warm-up operation
Perform a warm-up operation for about 15 minutes before operation.
To prevent operations of the temperature control module from being affected by the temperature rise inside
the module just after the power-on, perform a warm-up operation for about 15 minutes before the auto tuning
or the operation.