manualshive.com logo in svg

Mitsubishi LANCER 2012, Manual

Share
Download
Mitsubishi LANCER 2012 Manual Download Page 76

Seat and restraint systems

2-43

2

SRS warning light/display

N00408300494

Warning light

Warning display type 1

Warning display type 2

If there is an error in the system, the warning light will come on

and the warning display will appear on the information screen
in the multi-information display.
Under normal conditions, the warning light comes on when the

ignition switch is turned to the “ON” position and goes off a
few seconds later.
The warning light will also come on and remain on when the

SRS airbags and the seat belt pre-tensioner system have been
activated.
The warning light/display is used for both SRS airbag warn-

ings and seat belt pre-tensioner system warnings.

WARNING

!

●

If any of the following conditions occur, you should

immediately have the airbag system in your vehicle

inspected by an authorized Mitsubishi Motors

dealer as soon as possible:

• The passenger’s airbag off indicator comes on

when an adult is sitting on the front passenger

seat.

• The passenger’s airbag off indicator does not come

on when the front passenger’s seat is not occupied.

• The passenger’s airbag off indicator does not come

on when the ignition switch is turned to the “ON”

position.

• The passenger’s airbag off indicator comes on and

goes out repeatedly.

●

Do not attach any accessory to your vehicle that

makes the passenger’s airbag off indicator difficult

or impossible to see.

You must be able to see the passenger’s airbag off

indicator and verify the status of the passenger’s

airbag system.

BK0138600US.book  43 

ページ

  

２０１１年７月１７日　日曜日　午後２時３２分

Summary of Contents for LANCER 2012



















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands