manualshive.com logo in svg

Mitsubishi LANCER 2012, Manual

Share
Download
Mitsubishi LANCER 2012 Manual Download Page 197

3-102

Features and controls

3

When the selector lever cannot be shifted from the “P” 

(PARK) position

N00563100021

When the selector lever cannot be shifted from the “P” (PARK)
position to another position while the brake pedal is pressed
and held down with the ignition switch at the “ON” position,

the battery may be flat or the shift-lock mechanism may be
malfunctioning.
Immediately have your vehicle checked by an authorized

Mitsubishi Motors dealer or a repair facility of your choice.
If you need to move the vehicle, shift the selector lever as fol-
lows.

1. Make sure the parking brake is fully applied.
2. Stop the engine if it is running.
3. Insert a screwdriver with a cloth over its tip into the notch

(A) of the cover. Pry gently as shown to remove the cover.

4. Depress the brake pedal with the right foot.
5. Turn the ignition switch to the “ACC” position.

NOTE

●

For vehicles with the Free-hand Advanced Security

Transmitter (F.A.S.T.-key), turn the ignition switch to the
“ACC” position with the emergency key if the vehicle
battery is flat.

6. Insert a screwdriver in the shift-lock release hole (B).

Shift the selector lever to the “N” (NEUTRAL) position
while pressing the screwdriver down.

BK0138600US.book  102 

ページ

  

２０１１年７月１７日　日曜日　午後２時３２分

Summary of Contents for LANCER 2012



















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands