manualshive.com logo in svg

Mitsubishi LANCER 2012, Manual

Share
Download
Mitsubishi LANCER 2012 Manual Download Page 153

3-58

Features and controls

3

“Child safety locks” for rear door

N00509400190

Child safety locks help prevent rear passengers, especially chil-
dren, from opening the rear door using the inside door handle. 

A lock lever for the child safety lock is provided on each rear
door.
When the lever is in the lock position (1), the rear door cannot

be opened using the inside door handle.
To open the rear door when the child safety lock lever is in the
lock position, pull the outside door handle.

When the lever is in the release position (2), the child safety
lock is released and the rear door can be opened using the
inside door handle.

1- To lock 
2- To release

WARNING

!

●

Always keep the doors tightly closed and locked

when driving. An unlocked door may be acciden-
tally opened by a passenger, especially by a child
who could fall out. Also, if the doors are not locked,

there is a greater risk of someone being thrown from
the vehicle in an accident.

BK0138600US.book  58 

ページ

  

２０１１年７月１７日　日曜日　午後２時３２分

Summary of Contents for LANCER 2012



















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands