manualshive.com logo in svg

Mitsubishi LANCER 2012, Manual

Share
Download
Mitsubishi LANCER 2012 Manual Download Page 125

3-30

Features and controls

3

Steering wheel lock

N00514300025

To lock

Turn the ignition switch to the “LOCK” position.

Turn the steering wheel until it is locked.

To unlock

Turn the ignition switch to the “ACC” position while moving
the steering wheel slightly.

NOTE

●

If the front wheels are turned, the anti-theft lock may
sometimes make it difficult to turn the ignition switch
from “LOCK” to “ACC” position. Firmly turn the steer-

ing wheel to the left or to the right as you turn the ignition
switch.

Starting

N00514600217

Tips for starting

●

Do not operate the starter motor for longer than 15 sec-
onds as this could run the battery down or damage the
starter motor. If the engine does not start, turn the ignition

switch back to the “LOCK” position, wait a few seconds,
and then try again. Trying repeatedly with the engine or
starter motor still turning will damage the starter mecha-

nism.

●

If the engine will not start because the battery is weak or
discharged, refer to “Jump-starting the engine” on page 6-

2 for instructions.

●

A longer warm up period will only consume extra fuel.
The engine is warmed up enough for driving when the bar

graph of the engine coolant temperature display starts to
move. Refer to “Interrupt display screen (With ignition
switch in the “ON” position)” on page 3-194.

●

On vehicles equipped with the Twin Clutch SST, the fol-
lowing may occur after the engine is started, but they do
not indicate an abnormality.

• You may hear operational sounds of the Twin Clutch

SST and you may feel vibration in the vehicle body.

CAUTION

!

●

Carry the key with you when leaving the vehicle.

●

If your vehicle needs to be towed, turn the ignition
switch to the “ACC” position to unlock the steering
wheel.

BK0138600US.book  30 

ページ

  

２０１１年７月１７日　日曜日　午後２時３２分

Summary of Contents for LANCER 2012



















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands