Mitsubishi LANCER 2012 Manual Download

Page: 628 / 722

Vehicle care and maintenance

7-31

Service Description

EXAMPLE: 95H

Maximum Load

Maximum load indicates the maximum load this tire is

designed to carry.

Maximum Pressure

Maximum Pressure indicates the maximum permissible

cold tire inflation pressure for this tire.

Tire Identification Number (TIN)

The TIN may be found on one or both sides of the tire but

the date code may only be on one side. Look for the TIN on

the outboard side of tires as mounted on the vehicle. If the

TIN is not found on the outboard side then you will find it

on the inboard side of the tire.

EXAMPLE: DOT MA L9 ABCD 1504

Load index

A numerical code associated with the maximum

load a tire can carry.

Speed symbol

A symbol indicating the range of speeds at

which a tire can carry a load corresponding to its

load index under certain operating conditions.

The maximum speed corresponding to the speed

symbol should only be achieved under specified

operating conditions. (i.e. tire pressure, vehicle

loading, road conditions and posted speed lim-

its)

WARNING

●

Overloading of your tire is dangerous. Overload-

ing can cause tire failure, affect vehicle handling,

and increase your stopping distance. Use tires of

the recommended load capacity for your vehicle.

Never overload them.

DOT

Department of Transportation

This symbol certifies that the tire is in compli-

ance with the U.S. Department of Transporta-

tion tire safety standards, and is approved for

highway use.

Code representing the tire manufacturing loca-

tion. (2 digits)

ABCD

Code representing the tire size. (2 digits)

Code used by tire manufacturer. (1 to 4 digits)

Number representing the week in which the tire

was manufactured. (2 digits)

Number representing the year in which the tire

was manufactured. (2 digits)

BK0138600US.book 31

ページ

２０１１年７月１７日　日曜日　午後２時３２分

Summary of Contents for LANCER 2012



















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LANCER 2012

Reviews:

Related manuals for LANCER 2012

Brands by name

Popular brands

Mitsubishi LANCER 2012, Manual

Search results

Summary of Contents for LANCER 2012

Reviews:

Related manuals for LANCER 2012

Brands by name

Popular brands