manualshive.com logo in svg

Mitsubishi LANCER 2012, Manual

Share
Download
Mitsubishi LANCER 2012 Manual Download Page 218

Features and controls

3-123

3

NOTE

●

Only the forward gears 1 to 6 can be selected.
To reverse or park, place the gearshift lever in the “R”
(REVERSE) or “P” (PARK) position. 

●

During manual shifting, downshifting will be performed
automatically when the vehicle slows down and the trans-
mission will downshift to 1st gear before the vehicle

stops.

●

If the gearshift lever or sportronic steering wheel shifters
are operated repeatedly, the transmission will also shift

repeatedly.

●

In order to ensure driving performance, upshifting may
not occur depending on the vehicle speed even if the gear-

shift lever or sportronic steering wheel shifters are oper-
ated. In addition, in order to prevent excessive engine
speed, the buzzer sounds and downshifting may not occur

depending on the vehicle speed even if the gearshift lever
or sportronic steering wheel shifters are operated.

●

When driving in an aggressive manner involving high

engine rpm, sudden acceleration and/or deceleration, the
Twin Clutch SST could take longer to shift due to higher
fluid temperatures.

CAUTION

!

●

When manually shifting while the vehicle is being

driven, select the correct shift position to control the
engine speed so that the tachometer indicator does
not enter the red zone.

●

Sudden engine braking and rapid acceleration can
cause the vehicle to skid. Shift down according to
road conditions and vehicle speed.

●

If both the left and right sportronic steering wheel
shifters are operated at the same time, the transmis-
sion may not change gears.

BK0138600US.book  123 

ページ

  

２０１１年７月１７日　日曜日　午後２時３２分

Summary of Contents for LANCER 2012



















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands