manualshive.com logo in svg

Mitsubishi LANCER 2012, Manual

Share
Download
Mitsubishi LANCER 2012 Manual Download Page 205

3-110

Features and controls

3

Passing acceleration

N00514900063

To gain extra acceleration in “D” (DRIVE) position (when
passing another vehicle) push the accelerator to the floor if it is
safe to do so in traffic conditions. The CVT will automatically

downshift.

NOTE

●

In sports mode, downshifts do not take place when the

accelerator is depressed all the way to the floor.

Waiting

N00515000074

For short waiting periods, such as at traffic lights, the vehicle

can be left in selector lever position and held stationary with
the service brake.
For longer waiting periods with the engine running, the selec-

tor lever should be placed in the “N” (NEUTRAL) position.

●

Do not rev the engine with the brake pedal pressed
when the vehicle is stationary.

This can damage the CVT.
Also, when you depress the accelerator pedal while
holding down the brake pedal with the selector lever

in the “D” (DRIVE) position, the engine revolutions
may not rise as high as when performing the same
operation with the selector lever in the “N” (NEU-

TRAL) position.

CAUTION

!

CAUTION

!

●

To avoid transmission overheating, never try to keep
your vehicle stationary on a hill by using the acceler-

ator pedal. Always apply the parking brake and/or
service brake.

●

Unexpected acceleration may occur if the selector

lever is in a position other than “P” (PARK) or “N”
(NEUTRAL).
Before driving off from a stop, make sure that the

selector lever is in “D” (DRIVE) position or “Sports
mode” position.

BK0138600US.book  110 

ページ

  

２０１１年７月１７日　日曜日　午後２時３２分

Summary of Contents for LANCER 2012



















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands