manualshive.com logo in svg

Mitsubishi LANCER 2012, Manual

Share
Download
Mitsubishi LANCER 2012 Manual Download Page 359

3-264

Features and controls

3

6. When all enrollment commands have been read out, the

voice guide will say “Speaker enrollment is complete.”
The system will then end the speaker enrollment process
and return to the main menu.

NOTE

●

Completing the speaker enrollment process will turn on
the voice model automatically.

●

The commands “Help” and “Cancel” will not work in this
mode.

Enabling and disabling the voice model and retraining

N00564900013

You can turn a voice model registered with the speaker enroll-
ment function on and off whenever you want.
You can also retrain the system.

Use the following procedure to perform these actions.

1. Press the SPEECH button.
2. Say “Voice training.”
3. If you have completed a speaker enrollment process once

already, the voice guide will say either “Enrollment is
enabled. Would you like to disable or retrain?” or “Enroll-
ment is disabled. Would you like to enable or retrain?”

4. When enrollment is “enabled,” the voice model is on;

when enrollment is “disabled,” the voice model is off. Say
the command that fits your needs. 

Say “Retrain” to start the speaker enrollment process and
recreate a new voice model. (Refer to “Speaker enroll-
ment” on page 3-263.

）

Connecting the Bluetooth

®

 2.0 interface and 

Bluetooth

®

 device

N00565000082

Before you can make or receive hands-free calls or play music
using the Bluetooth

®

 2.0 interface function, you must pair the

Bluetooth

®

 device and Bluetooth

®

 2.0 interface.

NOTE

●

Pairing is required only when the device is used for the
first time. Once the device has been paired with the
Bluetooth

®

 2.0 interface, all you need is to bring the

device into the vehicle next time and the device will con-
nect to the Bluetooth

®

 2.0 interface automatically (if sup-

ported by the device).

Up to 7 Bluetooth

®

 devices can be paired with the Bluetooth

®

2.0 interface.
If multiple paired Bluetooth

®

 devices are available in the vehi-

cle, the cellular phone or music player most recently connected
is automatically connected to the Bluetooth

®

 2.0 interface.

You can also change a Bluetooth

®

 device to be connected.

NOTE

●

Please refer to the following website for a list of compati-
ble devices:

www.mitsubishifuse.com
Or contact Mitsubishi hands-free customer support at
(888)702-4100.

BK0138600US.book  264 

ページ

  

２０１１年７月１７日　日曜日　午後２時３２分

Summary of Contents for LANCER 2012



















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands