manualshive.com logo in svg

Mitsubishi LANCER 2012, Manual

Share
Download
Mitsubishi LANCER 2012 Manual Download Page 360

Features and controls

3-265

3

To pair

To pair a Bluetooth

®

 device with the Bluetooth

®

 2.0 interface,

follow the steps below.

NOTE

●

For assistance with pairing, please go to the following

website.
www.mitsubishifuse.com

1. Stop your vehicle in a safe area, put the shift lever (man-

ual transaxle) in the “N” (Neutral) position, or the selector
lever {continuously variable transmission (CVT)} or
gearshift lever (Twin Clutch SST) in the “P” (PARK)

position, and then pull the parking brake lever.

NOTE

●

You cannot pair any Bluetooth

®

 device with the

Bluetooth

®

 2.0 interface unless the vehicle is parked.

Before pairing a Bluetooth

®

 device with the Bluetooth

®

2.0 interface, confirm that the vehicle is parked in a safe
location.

2. Press the SPEECH button.
3. Say “Setup.”
4. Say “Pairing Options.”

5. The voice guide will say “Select one of the following:

pair, edit, delete, or list.” Say “Pair.”

NOTE

●

If 7 devices have already been paired, the voice guide will

say “Maximum devices paired” and then the system will
end the pairing process. To register a new device, delete
one device and then repeat the pairing process.

(Refer to “Deleting a device” on page 3-266.)

6. The voice guide will say “Please say a 4-digit pairing

code.” Say a 4-digit number.

When the confirmation function is on, the system will
confirm whether the number said is acceptable. Answer
“Yes.”

Answer “No” to return to pairing code selection.

NOTE

●

Some Bluetooth

®

 devices require a specific pairing code.

Please refer to the device manual for pairing code require-
ments.

●

The pairing code entered here is only used for the
Bluetooth

®

 connection certification. It is any 4-digit num-

ber the user would like to select.
Remember the pairing code as it needs to be keyed into
the Bluetooth

®

 device later in the pairing process. 

Depending on the connection settings of the Bluetooth

®

device, this code may have to be entered each time you
connect the Bluetooth

®

 device to the Bluetooth

®

 2.0

interface. For the default connection settings, refer to the
instructions for the device.

BK0138600US.book  265 

ページ

  

２０１１年７月１７日　日曜日　午後２時３２分

Summary of Contents for LANCER 2012



















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands