manualshive.com logo in svg

Mitsubishi LANCER 2012, Manual

Share
Download
Mitsubishi LANCER 2012 Manual Download Page 348

Features and controls

3-253

3

Precautions to observe when using wipers and 

washers

N00523500209

NOTE

●

Do not use the wipers when the windshield is dry. This
could scratch the glass and wear the wiper blades prema-
turely.

●

Before using the wipers in cold weather, check to be sure
that the wiper blades are not frozen to the windshield.
Using the wipers while the blades are frozen could cause

the wiper motor to burn out.

●

If the wipers become blocked by ice or other deposits on
the glass, the motor may still burn out even if the wiper

switch is OFF. If deposits form on the windshield, park
your vehicle in a safe place, turn off the engine, and clean
the glass so that the wipers can operate smoothly. 

●

Avoid using the washer for more than 20 seconds at a
time. Do not operate the washer when the fluid reservoir
is empty or the pump may fail.

●

During cold weather, add a recommended washer solution

that will not freeze in the washer reservoir. Otherwise the
washer may not work or may be damaged.

●

Replace the wiper blades when they are worn. Use the

proper size replacement blades. If you have questions, ask
your authorized Mitsubishi Motors dealer.

CAUTION

!

●

If the washer is used in cold weather, the washer
fluid sprayed onto the glass might freeze, blocking

your view. In cold weather, heat the glass with the
defroster before using the washer.

BK0138600US.book  253 

ページ

  

２０１１年７月１７日　日曜日　午後２時３２分

Summary of Contents for LANCER 2012



















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands