16
17
Additional connection cables are not
provided with the HDTV Receiver.
They are available at most electronic
stores.
IMPORTANT
Connecting an Antenna
Antenna or Wall Outlet Cable
for Digital Broadcasts
For cable or antenna with coaxial lead
(Figure 1)
Connect the incoming cable to ANT-DTV on the HDTV
Receiver back panel.
Separate UHF and VHF Antennas
(Figure 2)
.
Connect the UHF and VHF antenna leads to the UHF/
VHF combiner.
. Push the combiner onto ANT-A on the HDTV
Receiver back panel.
Note:
UHF/VHF combiners are not provided with
the HDTV Receiver. They should be available at
most electronic stores.
Mitsubishi strongly recommends against using antennas
with twin flat leads. Twin flat lead antenna wires are
subject to interference which may adversely affect the
performance of the HDTV Receiver. We recommend
using coaxial antenna cable.
Connecting an Analog Antenna
Figure 1. Antenna or wall outlet cable
ANT-A
LOOP
OUT
ANT-B
ANT-DTV
IR SENSOR
INPUT
HD-5000 back panel
Antenna or Wall Outlet
Cable for digital broadcasts
Figure 2. Connecting separate UHF and VHF antennas
