66
67
Remote Control Functions: Channel Selection, PIP and POP
Channel Selection
For Ant-A or Ant-B Channels: You may
• Enter three numbers (for channel , press ), or
• Press the channel number and ENT (for channel , press , then ENT), or
• Enter the channel number and wait four seconds. The HDTV Receiver will change automatically.
For Ant-DTV Channels
(When Ant-DTV is the current device):
• Enter two or three numbers for the major channel number. If three numbers are pressed, the separator is automatically
added and you may proceed to step . If two numbers are pressed, you must add the separator by pressing the
CANCEL/SUB button on the remote control, or wait seconds and the first sub-channel number is display.
• Enter a -digit sub-channel number and wait four seconds. Enter a -digit sub-channel number and press ENT. Or
enter digits for this sub-channel and the TV will automatically switch channels.
Remote Control Functions:
Operation of PIP and POP
Picture-In-Picture (PIP) and Picture-Outside-Picture (POP) features allow you to view programming in different ways.
While watching the main screen, you can display programs from other channels and other inputs. You can display a
single PIP, side-by-side pictures, three POPs, or nine POPs.
Activating the PIP and POP
(Figures 1-5 on following page)
Press PIP/POP to activate the PIP/POP option. With each press of the PIP/POP button on the HDTV Receiver
remote control (within seconds of each other), the PIP/POP will cycle through the following display options:
• POP: side-by-side pictures
• POP
• POP
• PIP
• PIP/POP: off
To turn PIP/POP off, wait at least seconds, and press PIP/POP. The next time you activate PIP/POP, the last used
PIP/POP option will be displayed.
PIP/POP Formats
Standard
Expand
Narrow
PIP
X
X
X
Side by Side
X
X
POP
X
POP
X
Note:
Not all formats are available for PIP/POP.
