30
31
NetCommand® Setup - Getting Started
To use your HDTV Receiver/Controller’s NetCommand
feature, you need to provide some detailed information
during the setup of your Mitsubishi HDTV Receiver.
You must identify the Manufacturer of each device that
is connected to the HDTV Receiver. For each device,
the input to the HDTV Receiver and A/V receiver,
and the names for the device are pre-set during Initial
NetCommand setup. You may change those inputs or
names using the Edit NetCommand screen.
On your remote control, the ADJUST (left) and
(right) buttons allow you to navigate left and right to
different selections on the screen. The ADJUST (up)
and (down) buttons allow you to:
• Change the selected radio button
• Change selection in text boxes
• Navigate up and down on screens
Control Buttons
Much like the software on your computer, you will use
graphic buttons to navigate through the NetCommand
Setup screen. Highlight the button and press ENT to
select the function.
<Back Button
Use the <Back button to navigate back to the previous
screen.
Next> Button
Use the Next> button to navigate forward to the next
screen.
Cancel Button
The Cancel button will cancel out any changes you are
currently making without saving them into memory.
When you select the Cancel button, NetCommand
will prompt you to confirm that you want to cancel the
changes you are currently making. If you select Cancel
during Initial Setup, you can setup NetCommand later by
selecting Initial on the Edit NetCommand menu.
Checkbox
Checkmarks indicate the item or input is added or turned
On. Press ENT when the Checkbox is highlighted to
add or delete a checkmark. When viewing the Review
screen, a Checkbox reflects which devices are turned On
or Off, or connected to the HDTV Receiver.
The
ENT
(enter) button allows you to:
• Confirm the selected character when naming a
device
• Add or delete check marks in check boxes
• Select push buttons to change screens
Textbox
Press ADJUST (up) and (down) to make a selection.
Radio Buttons
The setting automatically changes when a new radio
button is selected.
