18
19
Connecting an Audio/Video Receiver
(Figure 8)
. Connect a video cable from Monitor VIDEO
OUTPUT on the back of the HDTV Receiver to the
HDTV Receiver VIDEO INPUT on the back of the
A/V Receiver.
Note:
If you have connected an S-VHS VCR to the
A/V Receiver, then follow the same video connection
using the S-Video cable and terminals on the HDTV
Receiver and A/V Receiver (instead of the VIDEO
cable).
. Connect a set of audio cables from the Monitor
AUDIO OUTPUT on the back of the HDTV Receiver
to the TV AUDIO INPUT on the back of the A/V
Receiver. The red cable connects to the R (right)
channel and the white cable connects to the L (left)
channel.
Figure 8. Connecting an Audio/Video Receiver
When you connect a digital A/V Receiver with Dolby
Digital
TM
surround sound:
. Connect one end of the digital audio cable to the
DIGITAL AUDIO OUTPUT on the back of the
HDTV Receiver. Connect the other end to the
COAXIAL DIGITAL INPUT on the back of the
A/V Receiver. Check the Owner’s Guide for the A/V
Receiver for information concerning the use of the
digital input and switching between the digital sound
and analog stereo sound from the HDTV Receiver.
Note:
Video connections shown are used primarily for
recording to a VCR connected to the A/V Receiver.
Analog left and right connections are required to send
any audio signals from Ant-A or Ant-B to the A/V
Receiver.
Connecting an Audio/Video Receiver
