15
4.
OPERATION/CONTROL
<Control panel>
The operation panel cannot be removed from the inverter.
Used to give the forward rotation
operation command. Use Pr. 17
to set reverse rotation.
Turns on/flickers* to indicate operation.
RUN
PU
EXT
MODE
SET
RUN
PU
EXT
STOP
RESET
+
-
Lit to indicate the PU
operation mode.
Shows the frequency,
parameter number, etc.
EXT indication
Lit to indicate the external
operation mode.
Setting dial
Used to change the frequency
setting and parameter values.
This dial cannot be removed.
Used to switch between the
PU and external operation
mode. (Change the Pr. 79
value to use the combined
mode.)
PU/EXT key
RUN key
STOP/RESET key
Used to stop operation
or reset an alarm.
SET key
Used to define each setting.
Used to change the setting mode.
MODE key
*RUN indication On: Indicates that forward rotation operation is being performed.
Slow flickering (1.4 s cycle): Indicates reverse rotation.
Fast flickering (0.2 s cycle) : Indicates that operation is not
RUN
being performed but the key
was pressed or the start command
was given.
RUN indication
PU indication
3-digit monitor LED
<Basic operation> (Factory setting)
Parameter setting
MODE
Alarm history
MODE
PU
EXT
Press
PU/EXT
key.
Turn setting
dial to match
frequency.
SET
Press
SET
key.
[Operation panel is used for operation]
PU
EXT
Press
PU/EXT
key.
Turn setting dial until
desired parameter
number appears.
SET
Press SET key to
show present setting.
[Parameter setting change]
Turn setting
dial to change
value.
SET
Press SET key
to complete
setting.
Monitor/frequency setting
MODE
Press
MODE
key.
Return
After setting is complete,
press key once to
show alarm history,
or twice to show frequency
setting screen.
MODE
Frequency setting has
been written and
completed!!
and frequency flicker.
RUN
Press to start.
STOP
RESET
Press to stop.
Press
MODE
key.
Press
MODE
key.