Headlamps and other lamps go on
NOTE
l
On vehicles with the automatic light sensor
(A), the sensitivity of the automatic on/off
control can be adjusted. For further informa-
tion, contact a MITSUBISHI MOTORS Au-
thorized Service Point.
On vehicles equipped with MITSUBISHI
Multi-Communication System (MMCS),
screen operations can be used to make the
adjustment.
Refer to the separate owner’s manual for de-
tails.
l
When the headlamps are turned off by the
automatic on/off control with the ignition
switch in the “ON” position or the operation
mode in ON, the front fog lamps (if so
equipped) and rear fog lamps also go off.
When the headlamps are subsequently
turned back on by the automatic on/off con-
trol, the front fog lamps also come on but the
rear fog lamp stays off. If you wish to turn
the rear fog lamp back on, operate the switch
again.
NOTE
l
Do not place anything on the automatic light
sensor (A), and do not clean with a glass
cleaner.
Type 1
Type 2
l
If the lamps do not turn on or off with the
switch in the “AUTO” position, manually
operate the switch and we recommend you
to have your vehicle checked.
Lamps (headlamps, fog lamp,
etc.) auto-cutout function
E00532701537
l
If the following operation is performed
while the lamp switch is in the “
” po-
sition, the lamps will turn off automati-
cally when the driver’s door is opened.
[Except vehicles equipped with keyless
operation system]
The ignition switch is turned to the
“LOCK” or “ACC” position, or the key
is removed from the ignition switch.
[For vehicles equipped with the keyless
operation system] The operation mode is
put in OFF or ACC.
l
If the following operation is performed
while the lamp switch is in the “
” po-
sition, the lamps will remain on for
about 3 minutes while the driver’s door
is shut and will then automatically turn
off.
[Except vehicles equipped with keyless
operation system]
The ignition switch is turned to the
“LOCK” or “ACC” position, or the key
is removed from the ignition switch.
[For vehicles equipped with the keyless
operation system] The operation mode is
put in OFF or ACC.
Combination headlamps and dipper switch
5-56
OGFE16E1
Instruments and controls
5
Summary of Contents for 2015 OUTLANDER
