Mitsubishi 2015 OUTLANDER Owner'S Manual Download

Page: 344 / 490

Vehicles without a Bluetooth

2.0 Interface

A hands-free kit (available separately) is re-
quired.
(“Set value” bold typeface indicates factory
default settings.)

Settings value

Settings content

PHONE OFF

Do not use mobile phone
voice cut-in.

PHONE

MUTE

During mobile phone voice
cut-in, mute the audio.

PHONE ATT

During mobile phone voice
cut-in, output audio from
all speakers.

PHONE IN-L

During mobile phone voice
cut-in, output sound from
the left front speaker.

PHONE IN-R

During mobile phone voice
cut-in, output sound from
the right front speaker.

PHONE IN-LR

During mobile phone voice
cut-in, output sound from
the left and right front
speakers.

Vehicles with a Bluetooth

2.0

Interface

(“Set value” bold typeface indicates factory
default settings.)

Settings name

Settings

value

Settings con-

tent

PHONE IN set-

tings

PHONE

IN-R

During mobile
phone voice
cut-in, output
sound from the
right front
speaker.

PHONE

IN-L

During mobile
phone voice
cut-in, output
sound from the
left front
speaker.

HFM voice lan-

guage settings

ENG-

LISH

Change the
hands free mod-
ule voice lan-
guage.

FRENCH

GER-
MAN

SPANISH

ITALIAN

DUTCH

Settings name

Settings

value

Settings con-

tent

HFM voice lan-

guage settings

PORTU-

GUESE

Change the
hands free mod-
ule voice lan-
guage.

RUSSI-

NOTE

Depending on the vehicle model, this may
not display.

Gracenote DB (Vehicles with a
Bluetooth

2.0 interface)

The version number can be confirmed.

1. Select “Gracenote DB” and press the

/SEL key.

2. Turn the

/SEL key and select “DB

Version”.

3. Press the /SEL key.

The DB Version is displayed.

System Settings

7-46

OGFE16E1

For pleasant driving

Summary of Contents for 2015 OUTLANDER











































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 OUTLANDER

Reviews:

Related manuals for 2015 OUTLANDER

Brands by name

Popular brands

Mitsubishi 2015 OUTLANDER, Owner'S Manual

Search results

Summary of Contents for 2015 OUTLANDER

Reviews:

Related manuals for 2015 OUTLANDER

Brands by name

Popular brands