manualshive.com logo in svg

Mitsubishi 2015 OUTLANDER, Owner'S Manual

Share
Download
Mitsubishi 2015 OUTLANDER Owner'S Manual Download Page 345

Troubleshooting

E00738401121

Please check these items if a message appears on the display, or if you think something is not working properly.

If This Message Appears...

A message is displayed on this product according to the situation.

Mode

Message

Cause

Response

CD

CHECK DISC

The disc is inserted upside down.

Insert with the label side up.

The disc has condensation on it.

Wait a while before inserting again.

DISC ERROR

The disc is damaged.

Clean the read surface of the disc.

The disc is dirty.

INTERNAL E

The drive has malfunctioned for some reason.

Check that there is no problem with the disc, and insert
the disc again. If the problem persists, consult a
MITSUBISHI MOTORS Authorized Service Point.

HEAT ERROR

The temperature inside the product is high.

Remove the disc, and wait for the internal temperature
to return to normal.

USB

FILE ERROR

Files that cannot be played are selected.

Select files that can be played.
→ “Audio Files (MP3/WMA/AAC)” on page 7-18

USB BUS PWR

There is high or low electrical current or voltage.

Turn the power OFF and wait a short while. If the
problem persists, consult a MITSUBISHI MOTORS
Authorized Service Point.

LSI ERROR

There is an internal malfunction for some reason.

 

UNSUPPORTED
FORMAT

Unsupported audio files have been played.

Confirm audio files that can be played.
→ “Audio Files (MP3/WMA/AAC)” on page 7-18

UNSUPPORTED
DEVICE

An unsupported USB device has been connected.

Please connect a USB memory device.

Troubleshooting

7-47

OGFE16E1

For pleasant driving

7

Summary of Contents for 2015 OUTLANDER











































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands