Mitsubishi 2015 OUTLANDER, Owner'S Manual

Page: 207 / 490

*: Front of the vehicle
Fuel injection amount learning
process (diesel-powered vehi-
cles)
E00627900027
To keep exhaust emissions and engine noise
low, the engine very occasionally performs a
learning process for the fuel injection
amount.
The engine sounds slightly different from
usual while the learning process is taking
place. The change in the engine sound does
not indicate a fault.
If the keyless operation key is
not operating properly
E00632901035
Insert the keyless operation key into the key
slot. Starting the engine and changing the op-
eration mode should now be possible.
Remove the keyless operation key from the
key slot after starting the engine or changing
the operation mode.
NOTE
l Do not insert into the key slot anything other
than the keyless operation key. This could
cause damage or a malfunction.
l Remove the object or additional key from
the the keyless operation key before insert-
ing the key into the key slot. The vehicle
may not be able to receive the registered ID
code from the registered key. Therefore, the
engine may not start and the operation mode
may not change.
l The keyless operation key is fixed in the key
slot when inserted in the illustrated direc-
tion. Simply pull out the key to remove it
from the key slot.
Keyless operation key remind-
er*
E00633000023
Warning lamp (mono-colour liquid crystal dis-
play)
Warning display (colour liquid crystal display)
If the operation mode is in OFF and the driv-
er’s door is opened with the keyless operation
key in the key slot, the warning lamp will
blink and the outer buzzer sounds for approx-
imately 3 seconds and the inner buzzer
sounds for approximately 1 minute or warn-
ing display will appear to remind you to re-
move the key.
NOx trap catalyst
(dieselpowered vehicles)
E00649200033
A NOx (nitrogen oxide) trap catalyst absorbs
the NOx contained in the exhaust gas of the
diesel engine.
NOx trap catalyst (dieselpowered vehicles)
6-25
OGFE16E1
Starting and driving
6