Mitsubishi 2015 OUTLANDER, Owner'S Manual

Page: 129 / 490

1. Press and hold the multi information dis-
play switch for about 2 seconds or more
to switch from the setting mode screen
to the menu screen.
Refer to “Changing the function set-
tings” on page 5-14.
2. Lightly press the multi information dis-
play switch to select “ALARM” (rest
time setting).
3. Press and hold the multi information dis-
play switch for about 2 seconds or more
to display “ALARM”.
4. Lightly press the multi information dis-
play switch to select the time until the
display.
5. Press and hold the multi information dis-
play switch for about 2 seconds or more,
the setting is changed to the selected
time.
NOTE
l The drive time is reset when the ignition
switch is turned off or the operation mode is
put in OFF.
Changing the turn-signal sound
E00529100396
It is possible to change the turn-signal sound.
1. Press and hold the multi information dis-
play switch for about 2 seconds or more
to switch from the setting mode screen
to the menu screen.
Refer to “Changing the function set-
tings” on page 5-14.
2. Lightly press the multi information dis-
play switch to select (changing the
turn-signal sound).
3. Press and hold the multi information dis-
play switch for about 2 seconds or more
to switch from 1 (turn-signal sound 1) to
2 (turn-signal sound 2), or from 2 to 1.
The setting changes to the selected turn-
signal sound.
Changing the momentary fuel
consumption display
E00529200339
It is possible to change the bar graph setting
of the momentary fuel consumption display.
1. Press and hold the multi information dis-
play switch for about 2 seconds or more
to switch from the setting mode screen
to the menu screen.
Refer to “Changing the function set-
tings” on page 5-14.
2. Lightly press the multi information dis-
play switch to select (changing the
momentary fuel consumption display).
3. Press and hold the multi information dis-
play switch for about 2 seconds or more
to switch from ON (with the green bar
graph) to OFF (without the green bar
graph), or from OFF to ON.
The setting changes to the selected bar
graph setting.
Returning to the factory set-
tings
E00523601918
Many of the function settings can be returned
to their factory settings.
1. Press and hold the multi information dis-
play switch for about 2 seconds or more
to switch from the setting mode screen
to the menu screen.
Refer to “Changing the function set-
tings” on page 5-14.
2. Lightly press the multi information dis-
play switch to select “RESET” (return-
ing to the factory settings).
3. When you press and hold the multi in-
formation display switch for about 5 sec-
onds or more, the buzzer sounds and all
of the function settings are returned to
the factory settings.
NOTE
l The factory settings are as follows:
Multi information display - Type 1
5-19
OGFE16E1
Instruments and controls
5