Mitsubishi 2015 OUTLANDER Owner'S Manual Download

Page: 329 / 490

NOTE

Pressing again will cancel.

Selecting a file, ejecting, fast forwarding, or
rewinding will cancel.

Folder Repeat Playback

Hold down the 1RPT key.

Repeat playback of the tracks within the fold-
er currently being played.

NOTE

Pressing again will cancel.

Even if the file is selected, folder repeat
playback will not be cancelled.

Random Playback (RDM)

Press the 2RDM key.

Play the tracks in the folder in a random or-
der.

NOTE

Pressing again will cancel.

Folder Random Playback

Hold down the 2RDM key.

Play all tracks in folders on the disc in a ran-
dom order.

NOTE

Pressing again will cancel.

Scan Playback (SCAN)

Press the SCAN key.

Play the first 10 seconds of each of the tracks
in the folder currently being played in order.

Search Tracks

Search folders and files, and select a track.

1. Turn the /SEL key to select the folder.
2. Press the /SEL key.

Files within the selected folder are dis-
played.

3. Turn the /SEL key to select the file.
4. Press the /SEL key.

This plays the selected file (track).

NOTE

While the folder is selected, press the 6
key to cancel track search mode.

NOTE

If there is no operation for 10 seconds after
selecting the folder, then track search mode
will be cancelled.

Select the folder, and hold down the

/SEL

key to start playback from the first track in
that folder.

While the file is selected, press the 6

key

to return to the previous operation.

While the file is selected, hold down the 6

key to cancel track search mode.

If there is no operation for five seconds after
selecting the file, that file is played back.

Disc operations such as selecting a track will
cancel track search mode.

Listen to an iPod

E00738001185

By connecting commercially-available iPod/
iPhone devices to this product, you can play
back tracks on these through the product.

CAUTION

Do not leave the iPod/iPhone unattended in
the vehicle.

Never hold these devices in your hand to op-
erate while driving, as this is dangerous.

No indemnification for data loss resulting
when the iPod/iPhone is connected to the
product will be possible.

Listen to an iPod

7-31

OGFE16E1

For pleasant driving

Summary of Contents for 2015 OUTLANDER











































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 OUTLANDER

Reviews:

Related manuals for 2015 OUTLANDER

Brands by name

Popular brands

Mitsubishi 2015 OUTLANDER, Owner'S Manual

Search results

Summary of Contents for 2015 OUTLANDER

Reviews:

Related manuals for 2015 OUTLANDER

Brands by name

Popular brands