Mitsubishi 2015 OUTLANDER, Owner'S Manual

Page: 386 / 490

Engine overheating
E00800603790
When the engine is overheating, the warning
will be displayed in the instrument cluster as
follows.
l The information screen in the multi in-
formation display will be interrupted and
the engine coolant temperature warning
display will appear. Also “ ” will blink.
(Colour liquid crystal display type)
l The high coolant temperature warning
lamp illuminates. (Mono-colour liquid
crystal display type)
If this occurs, take the following corrective
measures:
1. Stop the vehicle in a safe place.
2. Check whether steam is coming from the
engine compartment.
[If steam does not come from the engine
compartment]
With the engine still running, raise the
bonnet to ventilate the engine compart-
ment.
NOTE
l For vehicles equipped with the Auto Stop &
Go (AS&G) system, press the “Auto Stop &
Go (AS&G) OFF” switch to deactivate the
Auto Stop & Go (AS&G) system before
stopping the vehicle.
Refer to “To deactivate” on page 6-32.
[If steam is coming from the engine
compartment]
Stop the engine, and when the steam
stops, raise the bonnet to ventilate the
engine compartment. Restart the engine.
WARNING
l Do not open the bonnet while steam is
coming from the engine compartment. It
could cause steam or hot water to spurt
out, causing burns. Hot water could spurt
out even when there is no steam coming
out, and some parts will be very hot. Be
very careful when opening the bonnet.
l Be careful of hot steam, which could be
blowing off the reserve tank cap.
l
Do not attempt to remove the radiator
cap while the engine is hot.
*: Front of the vehicle
3. Confirm that the cooling fans (A) are
turning.
[If the cooling fans are turning]
After the high coolant temperature warn-
ing has gone off, stop the engine.
[If the cooling fans are not turning]
Engine overheating
8-04
OGFE16E1
For emergencies
8