Mitsubishi 2015 OUTLANDER, Owner'S Manual

Page: 388 / 490

Tools
1- Jack bar
2- Wheel nut wrench
Jack
The jack is used only for the purpose of
changing a tyre when a tyre is punctured.
NOTE
l The jack is maintenance-free.
l The jack is in conformity with EC law as ap-
proximated by the Machinery Directive
2006/42/EC.
l The EC declaration of conformity is attached
to the section “Declaration of Conformity”
in the end of this owner’s manual.
NOTE
• The business name, full address of the
manufacturer and of his authorised repre-
sentative and the designation of the jack
are described in the EC declaration of
conformity.
To remove
1. Remove the jack lid.
2. Retract the jack and remove it from its
installation fitting (A).
To retract
To store
1. Retract the jack, then return it to its orig-
inal position.
2. Extend the jack and firmly secure it,
then install the jack lid.
To retract
To extend
How to change a tyre
E00801202842
Before changing a tyre, first stop your vehi-
cle in a safe, flat location.
1. Park the vehicle on level and stable
ground, free of loose pebbles, etc.
2. Set the parking brake firmly.
3. On vehicles with M/T, stop the engine
and move the gearshift lever to the “R”
(Reverse) position.
On vehicles with A/T or CVT, move the
selector lever to the “P” (PARK) posi-
tion and stop the engine.
4. Turn on the hazard warning flashers and
set up a warning triangle, flashing signal
lamp, etc., at an adequate distance from
the vehicle, and have all your passengers
leave the vehicle.
How to change a tyre
8-06
OGFE16E1
For emergencies
8