Mitsubishi 2015 OUTLANDER, Owner'S Manual

Page: 124 / 490

The display shows the score you achieved in
the last several minutes.
[When the ignition switch is turned off or the
operation mode is put in OFF]
The display shows the overall ECO score the
function has counted from the time when the
ignition switch is turned to “ON” to the time
when it is turned to “LOCK” or “ACC”, or
from the time when the operation mode is set
to “ON” to the time when it is set to “OFF”.
ECO drive level
Low High
Changing the function settings
E00522701837
The “Display language”, “Temperature unit”,
“Fuel consumption unit”, and “Average fuel
consumption and speed reset method” etc.
setting can be modified as desired.
1. Stop the vehicle in a safe place.
Firmly apply the parking brake and put
the gearshift lever into the “N” (Neutral)
position (M/T) or the selector lever into
the “P” (PARK) position (A/T or CVT).
2. Lightly press the multi information dis-
play switch a few times to switch the in-
formation screen to the function setting
screen.
Refer to “Information screen (when the
ignition switch or the operation mode is
ON)” on page 5-06
CAUTION
l For safety, stop the vehicle before operating.
While driving, even if you operate the multi
information display switch, the function set-
ting screen is not displayed.
3. Press and hold the multi information dis-
play switch for about 2 seconds or more
to switch from the setting mode screen
to the menu screen.
NOTE
l To return the menu screen to the function
setting screen, press and hold the multi in-
formation display switch for about 2 seconds
or more.
l If no operations are made within about 30
seconds of the menu screen being displayed,
the display returns to the function setting
screen.
4. Select the item to change on the menu
screen and change to the desired setting.
Refer to the following items for further
details on the operation methods.
Refer to “Changing the reset mode for
average fuel consumption and average
speed” on page 5-15.
Refer to “Changing the fuel consump-
tion display unit” on page 5-16.
Refer to “Changing the temperature
unit” on page 5-16.
Multi information display - Type 1
5-14
OGFE16E1
Instruments and controls
5