Mitsubishi 2015 OUTLANDER, Owner'S Manual

Page: 126 / 490

Auto reset mode
l When the average fuel consumption and
average speed are being displayed, if
you hold down the multi information
display switch, the average fuel con-
sumption and average speed displayed at
that time are reset.
l When the engine switch or the operation
mode is in the following conditions, the
average fuel consumption display and
average speed display are automatically
reset.
[Except for vehicles equipped with key-
less operation system]
The ignition switch is in the “ACC” or
“LOCK” position for about 4 hours or
longer.
[For vehicles equipped with keyless op-
eration system]
The operation mode is in ACC or OFF
for about 4 hours or longer.
NOTE
l The average fuel consumption display and
average speed display can be reset separately
for the auto reset mode and for the manual
reset mode.
l The memory of the auto reset mode or man-
ual reset mode for the average fuel con-
sumption display and average speed display
is erased if the battery is disconnected.
Changing the fuel consumption
display unit
E00523000726
The display unit for fuel consumption can be
switched. The distance, speed, and amount
units are also switched to match the selected
fuel consumption unit.
1. Press and hold the multi-information
meter switch for about 2 seconds or
more to switch from the setting mode
screen to the menu screen.
Refer to “Changing the function set-
tings” on page 5-14.
2. Lightly press the multi-information me-
ter switch to select “AVG UNIT (fuel
consumption display setting)”.
3. Press and hold the multi-information
meter switch for about 2 seconds or
more to display “AVG UNIT” (fuel con-
sumption display unit setting).
4. Lightly press the multi information dis-
play switch to select the units.
5. Press and hold the multi information dis-
play switch for about 2 seconds or more
to change the setting to the selected unit.
NOTE
l The display units for the driving range, the
average fuel consumption, the average speed
and the momentary fuel consumption are
switched, but the units for the indicating
needle (speedometer), the odometer and the
tripmeter will remain unchanged.
The distance and speed units are also switch-
ed in the following combinations to match
the selected fuel consumption unit.
Fuel con-
sumption Distance
(driving
range)
Speed (aver-
age speed)
L/100 km km km/h
mpg (US) mile(s) mph
mpg (UK) mile(s) mph
km/L km km/h
Changing the temperature unit
E00523100701
The display unit for temperature can be
switched.
Multi information display - Type 1
5-16
OGFE16E1
Instruments and controls
5