Mitsubishi 2013 Outlander Service Manual Download Page 565

Page: 565 / 602

7-64

Vehicle care and maintenance

4. To install the bulb, perform the removal steps in reverse.

NOTE

●

When mounting the light unit, align the groove (D) on the
light unit with the clip on the body and the pin (E) on the

unit with the hole in the body.

Back-up lights

N00929100054

1. Open the liftgate.
2. Insert a screwdriver into the notch of the cover and pry

gently to remove the cover.

NOTE

●

Wrap a cloth around the tip of the screwdriver to keep
from scratching the cover.

BK0150700US.book 64

ページ

２０１２年３月２２日　木曜日　午後６時４６分

Summary of Contents for 2013 Outlander



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2013 Outlander

Reviews:

Mitsubishi 2013 Outlander, Service Manual, Page: 565 / 602

Search results

Summary of Contents for 2013 Outlander

Reviews: