Mitsubishi 2013 Outlander Service Manual Download Page 491

Page: 491 / 602

6-16

For emergencies

[Vehicle with the flange nuts]

• Aluminium wheel

Temporarily tighten the wheel nuts until their flange

section comes in contact with the wheel and it is no

longer loose.

• Steel wheel

Install the wheel nuts with their tapered ends facing
inward, then tighten by hand until the wheel is no longer

loose.

NOTE

●

Flange nuts can be temporarily used on the compact spare
or steel wheel, but return them to the original wheel and

tire as soon as possible.

●

If all 4 wheels are changed to steel wheels, use tapered
nuts.

CAUTION

●

Never apply oil to either the wheel bolts or the nuts

or they will tighten too much.

BK0150700US.book 16

ページ

２０１２年３月２２日　木曜日　午後６時４６分

Summary of Contents for 2013 Outlander



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2013 Outlander

Reviews:

Mitsubishi 2013 Outlander, Service Manual, Page: 491 / 602

Search results

Summary of Contents for 2013 Outlander

Reviews: