manualshive.com logo in svg

Mitsubishi 2013 Outlander, Service Manual, Page: 457 / 602

Share
Download
Mitsubishi 2013 Outlander Service Manual Download Page 457

5-88

Comfort controls

5

To play tracks from a Bluetooth

®

 device 

(vehicles with Bluetooth

®

 2.0 interface)

N00765300090

You can wirelessly connect a digital audio player or cellular
phone supporting Bluetooth

®

 to listen to the tracks on the con-

nected device.

Refer to “Bluetooth

®

 2.0 interface” for the connecting method,

etc. on page 3-205.

The following explains the basic playback method.

NOTE

●

Depending on the connected device, operation of the con-
nected device is limited to its available functions.

●

Depending on the connected device, the device may not

operate correctly.

●

A file protected by copyright might not be able to start

playback.

●

It is recommended to leave the equalizer of the connected
device flat.

●

The voice operation is not available to access music files
on the connected Bluetooth

®

 device.

Bluetooth

®

 device control panel and display

N00765400033

1- CD (Mode change) button
2- PWR (On-Off) button
3- DISP (Title display)button
4- PAGE (Title scroll)button
5- RPT (Repeat) button
6- RDM (Random) button
7- B (Bluetooth

®

) indicator

8- TRACK indicator
9- RPT/RDM/SCAN indicator

10- DISC DOWN (Pause/Stop) button

11- DISC UP (Play) button

12- SCAN button
13- TRACK (Track up/down) button

BK0150700US.book  88 

ページ

  

２０１２年３月２２日　木曜日　午後６時４６分

Summary of Contents for 2013 Outlander



























































































































































































































































































































































































































































































































































































































Reviews:

No comments