manualshive.com logo in svg

Mitsubishi 2013 Outlander, Service Manual, Page: 202 / 602

Share
Download
Mitsubishi 2013 Outlander Service Manual Download Page 202

Features and controls

3-105

3

ASC operation display or ASC OFF display

N00546500075

NOTE

●

The combination of items shown on the display varies
depending on the vehicle model.

NOTE

●

The   display/indicator may turn on when you start the
engine. This means that the battery voltage momentarily

dropped when the engine was started. It does not indicate
a malfunction, provided that the display goes out immedi-

ately.

●

When a compact spare tire has been put on your vehicle,
the gripping ability of the tire will be lower, making it
more likely that the   display/indicator will blink.

-

ASC operation display/ASC indicator
The display/indicator will blink when the ASC is operat-
ing.

-

ASC OFF display/ASC OFF indicator
This display/incicator will turn on when the ASC is
turned off with the “ASC OFF” switch.

CAUTION

!

●

When   display/indicator blinks, ASC is operating,
which means that the road is slippery or that your
vehicle’s wheels are beginning to slip. If this hap-

pens, drive slower with less accelerator input.

●

If the temperature in the braking system continues
to increase due to continuous brake control on a
slippery road surface, the   display/indicator will
blink. To prevent the brake system from overheat-
ing, the brake control of the traction control func-

tion will be temporarily suspended.

The engine control of the traction control function
and normal brake operation will not be affected.

Park your vehicle in a safe place. When the temper-
ature in the braking system has come down, the 
display/indicator will be turned off and the traction

control function will start operating again.

BK0150700US.book  105 

ページ

  

２０１２年３月２２日　木曜日　午後６時４６分

Summary of Contents for 2013 Outlander



























































































































































































































































































































































































































































































































































































































Reviews:

No comments