Mitsubishi 2013 Outlander Service Manual Download Page 50

Page: 50 / 602

Seat and restraint systems

2-23

Detachable rear center seat belt

N00409700017

The rear center seat belt can be detached to help avoid damage
caused by an object in the luggage compartment while the

driver’s side rear seat back is folded down.

To attach

1. Pull the seat belt out slowly and pass it through the seat

belt guide (A).

NOTE

●

If the seat belt locks up and cannot be pulled out, pull it

once with force and let it retract all the way.
Then, pull the belt out slowly once again.

WARNING

●

Never detach the rear center seat belt except when

the driver’s side rear seat back is folded down.

Using the rear center seat belt with the detachable
anchor unlatched increases the risk of serious injury

or death in an accident. Make sure the detachable

anchor is properly latched before the center seat belt
is used.

BK0150700US.book 23

ページ

２０１２年３月２２日　木曜日　午後６時４６分

Summary of Contents for 2013 Outlander



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2013 Outlander

Reviews:

Mitsubishi 2013 Outlander, Service Manual, Page: 50 / 602

Search results

Summary of Contents for 2013 Outlander

Reviews: