Mitsubishi 2013 Outlander Service Manual Download Page 505

Page: 505 / 602

7-4

Vehicle care and maintenance

Engine hood

N00937500477

To open

Use the engine hood release lever (located under the instrument
panel near the driver’s door) to unlock the engine hood.

Pull the lever toward you to release the engine hood latch.

Release the lever and lift the engine hood.

NOTE

●

To prevent damage to the engine hood and wipers, make
sure the wipers are at resting position when you open the

engine hood.

WARNING

●

Never use the release lever to unlatch the engine

hood while the vehicle is in motion.

●

Do not drive your vehicle unless the engine hood is

locked.

BK0150700US.book 4

ページ

２０１２年３月２２日　木曜日　午後６時４６分

Summary of Contents for 2013 Outlander



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2013 Outlander

Reviews:

Mitsubishi 2013 Outlander, Service Manual, Page: 505 / 602

Search results

Summary of Contents for 2013 Outlander

Reviews: