Mitsubishi 2013 Outlander Service Manual Download Page 277

Page: 277 / 602

3-180

Features and controls

Information screen display

N00558300038

Brake warning display

N00558400143

Type 1

Type 2

This warning is displayed if the vehicle is being driven with the
parking brake still applied. The warning light in the instrument

cluster only comes on when the parking brake is applied.

Type 1

Type 2

When the ignition switch is turned to the “ON” position or the
operation mode is put in ON, if the brake fluid is low, this

warning is displayed.

The warning light in the instrument cluster also illuminates.

CAUTION

●

If a vehicle is driven without releasing the parking

brake, the brakes will overheat, resulting in ineffec-

tive braking and possible brake failure.
If this warning is displayed, release the parking

brake.

CAUTION

●

If this warning stays on and does not go out while
driving, there is a danger of ineffective braking. If

this happens, park the vehicle in a safe place, and

contact an authorized Mitsubishi Motors dealer or a
repair facility of your choice.

BK0150700US.book 180

ページ

２０１２年３月２２日　木曜日　午後６時４６分

Summary of Contents for 2013 Outlander



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2013 Outlander

Reviews:

Mitsubishi 2013 Outlander, Service Manual, Page: 277 / 602

Search results

Summary of Contents for 2013 Outlander

Reviews: