Mitsubishi 2013 Outlander Service Manual Download Page 494

Page: 494 / 602

For emergencies

6-19

Wheel cover (if so equipped)

N00849400195

To remove

Wrap the tip of the bar with a cloth, insert it deeply into the
notch provided in the wheel cover, and pry the cover away

from the wheel.

Using the same procedure at the other wheel cover notches,
work the wheel cover away from the wheel to remove it com-

pletely.

NOTE

●

The wheel cover is made of plastic. Be careful when pry-

ing it off.

To install

CAUTION

●

Trying to remove the wheel cover with only your

bare hands can seriously injure your fingers.

CAUTION

●

Before installing the wheel cover to the wheel, make

sure that the tabs (A) on the back of the wheel cover
correctly engage the ring (B) to prevent the wheel

cover from coming off. Do not install a wheel cover
that has broken tabs.

BK0150700US.book 19

ページ

２０１２年３月２２日　木曜日　午後６時４６分

Summary of Contents for 2013 Outlander



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2013 Outlander

Reviews:

Mitsubishi 2013 Outlander, Service Manual, Page: 494 / 602

Search results

Summary of Contents for 2013 Outlander

Reviews: