Mitsubishi 2013 Outlander Service Manual Download Page 279

Page: 279 / 602

3-182

Features and controls

Oil pressure warning display

N00558700090

Type 1

Type 2

If the engine oil pressure drops while the engine is running, the
warning display is displayed on the information screen in the

multi-information display.

NOTE

●

The oil pressure warning display does not show the

amount of oil. The oil level must be checked using the
dipstick.

CAUTION

●

If the vehicle is driven while the engine oil is low, or

the oil level is normal but the warning is displayed,
the engine may overheat and damage may result.

●

If the warning is displayed while the engine is run-

ning, park your vehicle in a safe place as soon as
possible and check the engine oil level.

●

If this warning display comes on when the engine oil

level is proper, have your vehicle checked at an
authorized Mitsubishi Motors dealer or a repair

facility of your choice.

BK0150700US.book 182

ページ

２０１２年３月２２日　木曜日　午後６時４６分

Summary of Contents for 2013 Outlander



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2013 Outlander

Reviews:

Mitsubishi 2013 Outlander, Service Manual, Page: 279 / 602

Search results

Summary of Contents for 2013 Outlander

Reviews: