Mitsubishi 2013 Outlander Service Manual Download Page 138

Page: 138 / 602

Features and controls

3-41

Operation mode ON reminder system (vehicles

equipped with the F.A.S.T.-key)

N00503800105

If the driver’s door is opened while the engine is stopped and

the operation mode is in any position other than OFF, the oper-

ation mode ON buzzer will sound intermittently to remind you
to put the operation mode in OFF.

The warning display will be displayed on the information

screen in the multi-information display.

Power door locks

N00509300551

NOTE

●

When locking or unlocking with the key on the driver’s

door, only the driver’s door will lock or unlock.

●

Repeated continuous operation between lock and unlock
could activate the power door locking system’s built-in

protection circuit, and prevent the system from operating.

If this occurs, wait about 1 minute before operating the
power door lock switch.

BK0150700US.book 41

ページ

２０１２年３月２２日　木曜日　午後６時４６分

Summary of Contents for 2013 Outlander



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2013 Outlander

Reviews:

Mitsubishi 2013 Outlander, Service Manual, Page: 138 / 602

Search results

Summary of Contents for 2013 Outlander

Reviews: