Mitsubishi MOTORS Eclipse Cross 2018, Owner'S Manual, Page: 47 / 538

NOTE
l
On vehicles equipped with the Smartphone
Link Display Audio or the MITSUBISHI
Multi-Communication System (MMCS),
screen operations can be used to make the
adjustment. Refer to the separate owner’s
manual for details.
Dead Lock System*
The Dead Lock System helps prevent theft.
When the keyless entry system or the keyless
operation system has been used to lock all of
the doors and the tailgate, the Dead Lock
System makes it impossible to unlock the
doors using the inside lock knobs.
Keyless entry system Keyless operation
system
A- Lock switch
B- Unlock switch
C- Driver’s and front passenger’s door lock/
unlock switches*
D- Tailgate lock switch*
E- Tailgate open switch
CAUTION
l
Do not set the Dead Lock System when
someone is inside the vehicle. With the Dead
Lock System set, it is not possible to unlock
the doors using the inside lock knobs. If you
erroneously set the Dead Lock System, un-
lock the doors using the UNLOCK switch
on the key or using the keyless operation
function.
Setting the system
1. Turn the ignition switch to the “LOCK”
position and then remove the key (ex-
cept for vehicles equipped with the key-
less operation system), or put the opera-
tion mode in OFF (vehicles equipped
with the keyless operation system).
2. Get out of the vehicle. Close all of the
doors and the tailgate.
3. Press the LOCK switch (A) on the key
switch, the driver’s or front passenger’s
door lock/unlock switch (C), or the tail-
gate lock switch (D) to lock all of the
doors and the tailgate. The turn-signal
lamps will blink once.
4. Press the switch again within 2 seconds.
The turn-signal lamps will blink three
times to show that the Dead Lock Sys-
tem has been set.
Dead Lock System*
3-19
OGKE18E5
Locking and unlocking
3