Mitsubishi MOTORS Eclipse Cross 2018, Owner'S Manual, Page: 258 / 538

CAUTION
l
To maintain proper performance of the
FCM, LDW and AHB:
• Always keep the area around the sensor
clean.
If the inside of the windscreen where the
sensor is installed becomes dirty or fog-
ged, contact a MITSUBISHI MOTORS
Authorized Service Point.
• Do not apply an impact or load on the
sensor or its surrounding area.
• Do not put anything including a sticker or
film to the outer side of the windscreen in
front of or surrounding area of the sensor.
Also, do not put anything including a
sticker or film to the inner side of the
windscreen under the sensor.
• Do not attempt to detach or disassemble
the sensor and sensor mounting screw.
• The sensor front cover should not be
modified or painted.
• Do not cover the sensor mounted area
with a licence plate or anything such as a
grill guard, etc. (Type 2 only)
CAUTION
• If the windscreen is misted, remove the
mist from the windscreen by using the de-
mister switch.
• Maintain the wiper blades in good condi-
tion.
Refer to “Wiper blades” on page 9-05.
When replacing the wiper blades, use on-
ly MITSUBISHI MOTORS GENUINE
parts or equivalent.
• Do not dirty or damage the sensor.
• Do not spray glass cleaner on the sensor.
Also, do not spill liquid, such as a bever-
age, on the sensor.
• Do not install an electronic device, such
as an antenna, or a device that emits
strong electric waves near the sensor.
•
Always use tyres of the same size, same
type and same brand and that have no sig-
nificant wear differences.
• Do not modify the vehicle’s suspensions.
l If the windscreen on the sensor or in the sur-
rounding area of the sensor is cracked or
scratched, the sensor may not detect an ob-
ject properly. This could cause a serious ac-
cident. Turn off the FCM and have your ve-
hicle inspected as soon as possible at a
MITSUBISHI MOTORS Authorized Serv-
ice Point.
If you need to replace the windscreen, con-
tact a MITSUBISHI MOTORS Authorized
Service Point.
CAUTION
l
The sensor emits infrared rays when the ig-
nition switch is turned to the “ON” position
and the operation mode is put in ON. Do not
look into the sensor by using optical goods
such as a magnifying glass. The infrared ray
might injure your eyes.
Laser radar specifications
Laser classification
Max average power 45 mW
Pulse duration 33 ns
Wavelength 905 nm
Divergent angle
(horizon x vertical) 28° x 12°
Laser classification label
For Europe
Forward Collision Mitigation System (FCM)
6-88
OGKE18E5
Starting and driving
6