Mitsubishi MOTORS Eclipse Cross 2018, Owner'S Manual, Page: 229 / 538

To increase the set speed
There are two ways to increase the set speed.
RES + switch
Push up and hold the “RES +” switch (C)
while driving at the set speed, and your speed
will then gradually increase.
When you reach your desired speed, release
the switch. Your new cruising speed is now
set.
To increase your speed in small amounts,
push up the “RES +” switch (C) for less than
approximately 1 second and release it.
Each time you push up the “RES +” switch
(C), your vehicle will go approximately
1.6 km/h (1 mph) faster.
Accelerator pedal
While driving at the set speed, use the accel-
erator pedal to reach your desired speed and
then push down the “SET -” switch (B) and
release the switch momentarily to set a new
desired cruising speed.
To decrease the set speed
There are two ways to decrease the set speed.
SET - switch
Push down and hold the “SET -” switch (B)
while driving at the set speed, and your speed
will slow down gradually.
When you reach your desired speed, release
the switch. Your new cruising speed is now
set.
To slow down your speed in small amounts,
push down the “SET -” switch (B) for less
than approximately 1 second and release it.
Each time you push down the “SET -” switch
(B), your vehicle will slow down by approxi-
mately 1.6 km/h (1 mph).
Cruise control
6-59
OGKE18E5
Starting and driving
6