Mitsubishi MOTORS Eclipse Cross 2018, Owner'S Manual, Page: 327 / 538

/SEL key
(clockwise)
Increases the frequency be-
ing received.
key
(hold down)
Release the button to start
seek station selection, and
when a station is received,
scanning stops.
key
(hold down)
Preset Memory
Register the broadcast station in advance, and
select this at a later time.
1. Tune in to the frequency to register.
2. Hold down any of the keys from the
1RPT key to the 6 key.
A “Beep” sounds, and the preset key is
registered.
NOTE
l The preset memory can register a maximum
of 6 stations for each band (FM1, FM2,
FM3).
l If a preset key that already has a station reg-
istered is selected, then this is overwritten
with the new preset.
l Pressing the preset key will select the previ-
ously registered frequency.
Auto Memory (Auto Store)
The top 6 stations with a strong signal can be
automatically registered in order with preset
keys.
Hold down the RADIO key.
After completion of auto store operations, the
product will receive the station registered in
the preset key [1].
CAUTION
l Please be aware that the formerly-registered
frequency in the memory will be overwrit-
ten.
NOTE
l Using auto store for FM1 and FM2 switches
to FM3.
PTY Search
Select PTY (program content), and automati-
cally scan for stations.
1. During FM reception, press the PTY/
SCAN key.
This switches to the PTY selection
mode.
2. Turn the /SEL key to select PTY.
The PTY (program content) indicator
will flash, and station selection will au-
tomatically start. When a station is re-
ceived, the station name is displayed.
NOTE
l
This receives the station detected first.
l 10 seconds after reception, PTY search
mode will be cancelled.
Listening to DAB*
This explains how to listen to DAB.
To listen to DAB
1. Press the RADIO key to switch the
band. Switch between DAB1, DAB2,
and DAB3 bands.
The selected band is indicated on the
display.
NOTE
l This switches in the order FM1, FM2, FM3,
DAB1, DAB2, DAB3, MW, and LW.
Listening to DAB*
7-35
OGKE18E5
For pleasant driving
7