Mitsubishi MOTORS Eclipse Cross 2018, Owner'S Manual, Page: 102 / 538

Instruments
1- Tachometer
The tachometer indicates the engine
speed (r/min). The tachometer helps you
to obtain more economical driving and
also warns you of excessive engine
speeds (Red zone).
2- Multi-information display
®
p. 5-02
Information screen display
®
p. 5-22
3- Speedometer (km/h or mph + km/h)
4- Rheostat illumination button
®
p. 5-02
CAUTION
l When driving, watch the tachometer to make
sure that the engine speed indication does
not rise into the red zone (excessive engine
rpm).
Meter illumination control
Each time you press the rheostat illumination
button, there is a sound and the brightness of
the instruments changes.
1- Brightness level
2- Reostat illumination button
NOTE
l
You can adjust to 8 different levels respec-
tively for when the position lamps are illu-
minated and when they are not.
l The meter illumination switches automati-
cally to the adjusted brightness, depending
on the brightness outside the vehicle.
l The brightness level of the instruments is
stored when the ignition switch is turned off
or the operation mode is put in OFF.
l If you press and hold the button for approxi-
mately 2 seconds or more when the position
lamps are illuminated, the brightness level
changes to the maximum level. Pressing and
holding the button for approximately 2 sec-
onds or more again returns the brightness
level to the previous level.
On vehicles equipped with the Smartphone
Link Display Audio or MITSUBISHI Multi-
Communication System (MMCS), the map
screen colour may not be switched to night-
time setting when the meter illumination
brightness level is at the maximum.
Multi-information display
Always stop the vehicle in a safe place before
operating.
The following information is included on the
multi-information display: warnings, odome-
ter, tripmeter, average and instant fuel con-
sumption, average speed, etc.
Instruments
5-02
OGKE18E5
Instruments and controls
5