6 - 28
6 MOTION PROGRAMS FOR POSITIONING CONTROL
[Example]
<Command address 1>
G91;
#@10:L=1.;
G0 X#@10:L ; The travel value of X is any of the following values.
mm inch
degree
1 mm
0.1 inch
0.1 degree
<Command address 2>
G91;
#@10:F=1.;
G0 X#@10:F ; The travel value of X is equivalent to any of the following
values if it is "#@10F=1.;" (64-bit double precision real
number).
mm inch
degree
1 mm
0.1 inch
0.1 degree
<Feed speed (F) 1>
G91;
#@10:L=1.;
G01 X10.F#@10:L ; The feed speed (F) of X-axis is any of the following
values.
mm inch
degree
100 mm/min
10 inch/min
10 degree/min
<Feed speed (F) 2>
G91;
#@10F=1.;
G01 X10.F#@10F ; The feed speed (F) of X-axis is equivalent to any of
the following values if it is "#@10F=1.;" (64-bit
double precision real number).
mm inch
degree
100 mm/min
10 inch/min
10 degree/min
