Mitsubishi Electric PUZ-ZM60VHA2, Service Manual

Page: 139 / 140

139
OCH771
[1:1]
Refrigerant
address=00
[Twin]
Refrigerant
address=00
Outdoor
unit
Indoor unit
02
Indoor unit
01
Outdoor
unit
Remote
controller
Remote
controller
Indoor unit
01
■
Refrigerant address
Single refrigerant system
In the case of single refrigerant system, the refrigerant address
is ˝ 00 ˝ and no operation is required.
Simultaneous twin, triple units belong to this category
(single refrigerant system).
Multi refrigerant system (group control)
Up to 16 refrigerant systems (16 outdoor units) can be con-
nected as a group by 1 remote controller. To check or set the
refrigerant addresses.
Refrigerant
address
00
Refrigerant
address
01
Refrigerant
address
02
Refrigerant
address
15
Outdoor
unit
Indoor unit
01
Outdoor
unit
Indoor unit
01
Outdoor
unit
Indoor unit
01
Outdoor
unit
Indoor unit
01
Remote
controller
Details on the operation data including each thermistor temperature and error history can be confirmed with the remote controller.
Select ˝Request code˝ with the
F1 or F2 button, and press
the [ ] button.
Select ˝ Check ˝ with the
F1 or F2 button, and press the [ ] button.
2. Set the Refrigerant address and Request code.
Select the item to be changed with the F1 or F2 button.
Select the required setting with the F3 or F4 button.
■
<Ref.address>setting [ 0 ] – [ 15 ]
■
<Request code>setting
Press the [ ] button, Data will be collected and displayed.
F1 F2 F3 F4
Request code
Request:
Request:
Request code
Ref.address
Request code
Cur. － ＋
Ref.address
Request code
－ ＋
Cur.
Request code: 004
Discharge temperature: 69˚C
1. Select ˝ Service ˝ from the Main menu, and press the [ ] button.
15-10. REQUEST CODE
Check menu
Cursor
Service menu:
Error history
Diagnosis
Smooth maintenance
Request code
F1 F2 F3 F4