Mitsubishi Electric PUHY-RP-Y(S)JM-B, Data Book

Page: 8 / 293

5
1. SPECIFICATIONS
OUTDOOR UNITS
Model PUHY-RP450YSJM-B(-BS)
Power source 3-phase 4-wire 380-400-415V 50/60Hz
Cooling capacity *1 kW 50.0
(Nominal) *1 kcal / h 43,000
*1 BTU / h 170,600
Power input kW 13.77
Current input A 23.2-22.0-21.2
COP kW / kW 3.63
Temp. range of Indoor W.B. 15.0~24.0°C(59~75°F)
cooling Outdoor D.B. -5.0~43.0°C(23~109°F)
Heating capacity *2 kW 56.0
(Nominal) *2 kcal / h 48,200
*2 BTU / h 191,100
Power input kW 12.81
Current input A 21.6-20.5-19.8
COP kW / kW 4.37
Temp. range of Indoor D.B. 15.0~27.0°C(59~81°F)
heating Outdoor W.B. -20.0~15.5°C(-4~60°F)
Indoor unit Total capacity 50~130 % of outdoor unit capacity
connectable Model / Quantity P15~P250 / 1~32
Sound pressure level (measured in anechoic room) dB <A> 59.5
Refrigerant Liquid pipe mm (in.) 15.88(5/8) Brazed
piping diameter Gas pipe mm (in.) 34.93(1-3/8) Brazed
Set Model
Model
PUHY-RP200YJM-B(-BS) PUHY-RP250YJM-B(-BS)
FAN Type x Quantity Propeller fan x 1 Propeller fan x 1
Air flow rate m
3
/ min 185 185
L/s 3,083 3,083
cfm 6,532 6,532
Control , Driving mechanism Inverter-control, Direct-driven by motor Inverter-control, Direct-driven by motor
Motor output kW 0.92 x 1 0.92 x 1
*3 External static press. 0 Pa (0 mmH
2
O) 0 Pa (0 mmH
2
O)
Compressor Type x Quantity Inverter scroll hermetic compressor Inverter scroll hermetic compressor
Manufacture AC&R Works, MITSUBISHI ELECTRIC CORPORATION AC&R Works, MITSUBISHI ELECTRIC CORPORATION
Starting method Inverter Inverter
Motor output kW 4.8 6.8
Case heater kW 0.035(240 V) 0.045(240 V)
Lubricant MEL32 MEL32
External finish
Pre-coated galvanized steel sheets (+powder coating for -BS
type)
Pre-coated galvanized steel sheets (+powder coating for -BS
type)
<MUNSELL 5Y 8/1 or similar> <MUNSELL 5Y 8/1 or similar>
External dimension HxWxD mm 1,710(1,650 without legs) x 920 x 760 1,710(1,650 without legs) x 920 x 760
in. 67-3/8(65 without legs) x 36-1/4 x 29-15/16 67-3/8(65 without legs) x 36-1/4 x 29-15/16
Protection devices High pressure protection
High pressure sensor, High pressure switch at 4.15,3.3MPa
(601,479 psi)
High pressure sensor, High pressure switch at 4.15,3.3MPa
(601,479 psi)
Inverter circuit (COMP. / FAN) Over-heat protection, Over-current protection Over-heat protection, Over-current protection
Compressor Over-heat protection Over-heat protection
Fan motor Thermal switch Thermal switch
Refrigerant Type x original charge R410A x 6.5kg (15lbs) R410A x 9.0kg (20lbs)
Control LEV and HIC circuit
Net weight kg (lbs) 230(508) 255(563)
Heat exchanger Salt-resistant cross fin & copper tube Salt-resistant cross fin & copper tube
HIC circuit (HIC: Heat Inter-Changer) Copper pipe,tube-in-tube structure Copper pipe,tube-in-tube structure
Pipe between unit and Liquid pipe mm (in.) 9.52(3/8) Brazed 9.52(3/8) Brazed
distributor Gas pipe mm (in.) 19.05(3/4) Brazed 22.2(7/8) Brazed
Defrosting method Auto-defrost mode (Reversed refrigerant cycle)
Drawing External KD94G726
Wiring KE94C490 KE94C490
Standard attachment Document Installation Manual
Accessory Refrigerant conn. pipe
Optional parts Outdoor Twinning kit: CMY-RP100VBK
Header: CMY-Y104/108/1010-G
Remarks ● .Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and other items shall be re-
ferred to the Installation Manual.
● .Due to continuing improvement, above specifications may be subject to change without notice.
● .Our company is unable to guarantee reliability of pre-existing pipes and pre-existing cables.
Notes : Unit converter
1.Nominal cooling conditions (subject to JIS B8615-1)
Indoor: 27°CDB/19°CWB (81°FDB/66°FWB), Outdoor: 35°CDB (95°FDB)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
2.Nominal heating conditions (subject to JIS B8615-1)
Indoor: 20°CDB (68°FDB), Outdoor: 7°CDB/6°CWB (45°FDB/43°FWB)
Pipe length: 7.5 m (24-9/16 ft.), Level difference: 0 m (0 ft.)
3.External static pressure option is available (30 Pa, 60 Pa/3.1 mmH
2
O, 6.1 mmH
2
O).
kcal =kW x 860
BTU/h =kW x 3,412
cfm
=m
3
/min x 35.31
lbs =kg / 0.4536
*The specification data is
subject to rounding variation.