11
GB
D
F
I
NL
E
P
GR
RU
TR
5. Space required around unit
[Fig. 5.0.1] (P.2)
<A> Top view
<B> Side view
<C> When there is little space up to an obstruction
A
Front
B
No restrictions on wall height (left and right)
C
Air outlet guide (Procured at the site)
D
Must be open
E
Wall height (H)
L
1
L
2
PUHN-(P-)YMF
450
250
PUHY-YMF
PUHY-P-YMF
450
450
(1) Basic space required
A space of at least 250 mm is necessary at the back for inlet air. Taking servicing,
etc. from the rear into account, a space of about 450 mm should be provided, the
same as at the front.
(2) When there is an obstruction above the unit
(3) When inlet air enters from right and left sides of unit
•
Wall heights (H) of the front and the back sides shall be within overall height of
unit.
•
When the total height is exceeded, add the “h” dimension of the
Fig. 5.0.1
to L
1
and L
2
.
(4) When unit is surrounded by walls
Note:
•
Wall heights (H) of the front and the back sides shall be within overall
height of unit.
•
If the panel height is exceeded, add the “h” dimension of the Fig. 5.0.1 to
L
1
and L
2
.
L
1
L
2
PUHN-(P-)YMF
450
250
PUHY-YMF
PUHY-P-YMF
450
450
Example: When h is 100,
the L
1
dimension becomes 450 + 100 = 550 mm.
(5) Collective installation and continuous installation
•
Space required for collective installation and continuous installation:
When installing several units, leave the space between each block considering
passage for air and people.
•
Open in the two directions.
•
In case wall height (H) exceeds overall height of unit, add “h” dimension (h =
wall height <H> – overall height of unit) to * marked dimension.
•
If there is a wall at both the front and the rear of the unit, install up to three units
consecutively in the side direction and provide a space of 1000 mm or more as
inlet space/passage space for each three units.
Super Y
Model
Noise level (50 / 60 Hz)
YMF-C
Constant capacity unit
Net weight
Variable capacity unit
P-YMF-C
Constant capacity unit
Variable capacity unit
Allowable pressure
External static pressure
YMF-C
Constant capacity unit
Refrigerant
Variable capacity unit
P-YMF-C
Constant capacity unit
Variable capacity unit
Indoor units
Total capacity
Model / Quantity
Operation temperature
PUHY-(P)600YSMF-C
PUHY-(P)650YSMF-C
PUHY-(P)700YSMF-C
PUHY-(P)750YSMF-C
61.5 / 62.0 dB <A>
62.0 / 62.5 dB <A>
61.5 / 62.0 dB <A>
62.0 / 62.5 dB <A>
240 kg
255 kg
240 kg
255 kg
432 kg
432 kg
472 kg
472 kg
240 kg
255 kg
240 kg
255 kg
440 kg
440 kg
475 kg
475 kg
HP: 2.94 MPa, LP: 1.3 MPa (For R22 models), LP: 1.6 MPa (For R407C models)
0 MPa
R22: 6.5 kg
R22: 8.5 kg
R22: 6.5 kg
R22: 8.5 kg
R22: 16 kg
R22: 16 kg
R22: 21 kg
R22: 21 kg
R407C: 6.5 kg
R407C: 8.5 kg
R407C: 6.5 kg
R407C: 8.5 kg
R407C: 16 kg
R407C: 16 kg
R407C: 21 kg
R407C: 21 kg
50 ~ 130 %
20 ~ 250 / 2 ~ 32
Cooling mode: – 5
°
CDB ~ 43
°
CDB
(10
°
CDB ~ 43
°
CDB with outdoor unit at lower position, or with indoor unit
20 or 25 type only is working.)
Heating mode: – 15
°
CWB ~ 15.5
°
CWB (– 12
°
CWB ~ 10
°
CWB with indoor unit 20 or 25 type only is working.)
3. Confirmation of parts attached
PUHY-(P)400/500YMF-C
1
Conduit mounting plate (ø62)
×
1
2
Conduit mounting plate (ø53)
×
1
3
Conduit mounting plate (ø46)
×
1
4
Tapping screw M4
×
4
5
Connecting pipe
×
1 (Connecting pipe is fixed with the unit)
6
Packing (inside ø29, outside ø39)
7
Wire mounting plate
×
1
PUHN-(P)200/250YMF-C
1
Conduit mounting plate (ø40)
×
1
2
Conduit mounting plate (ø33)
×
1
3
Conduit mounting plate (ø27)
×
1
4
Tapping screw M4
×
4
5
Oil balance pipe
×
1
6
Connecting pipe
×
1 (Connecting pipe is fixed with the unit)
7
Packing (inside ø23, outside ø35)
8
Seal
×
2
4. Combination with outdoor units
A Super Y (PUHY-(P)600/650/700/750YSMF-C) is produced when a Constant
Capacity Unit (PUHN-(P)200/250YMF-C) is combined with this unit (PUHY-(P)400/
500YMF-C).
A CMC-30A (optional) is required when using a combination of these units.
For R22 models
Super Y
Variable capacity unit
Constant capacity unit
PUHY-600YSMF-C
PUHN-200YMF-C
PUHY-650YSMF-C
PUHY-400YMF-C
PUHN-250YMF-C
PUHY-700YSMF-C
PUHN-200YMF-C
PUHY-750YSMF-C
PUHY-500YMF-C
PUHN-250YMF-C
For R407 models
Super Y
Variable capacity unit
Constant capacity unit
PUHY-P600YSMF-C
PUHN-P200YMF-C
PUHY-P650YSMF-C
PUHY-P400YMF-C
PUHN-P250YMF-C
PUHY-P700YSMF-C
PUHN-P200YMF-C
PUHY-P750YSMF-C
PUHY-P500YMF-C
PUHN-P250YMF-C
CMC-30A (optional)
1
Distributor (gas)
×
1
2
Oil balance pipe
×
2
3
Distributor (liquid)
×
1
4
Connecting pipe
×
5
5
Elbow
×
2
6
Pipe cover
×
1
