3 SIGNALS AND WIRING
3.3 Explanation of power supply system
57
3
Connecting wires
■
Fabricating the wire insulator
Refer to the following for the stripped length of the wire insulator. Set the appropriate length based on the wire type and
fabrication condition.
Twist the core wires lightly and straighten them as follows.
A ferrule can also be used when connecting to the connectors. If using a ferrule, choose from one of the ferrules and the
crimping tools shown below.
Wire size
Ferrule model (Phoenix Contact)
Crimping tool (Weidmüller)
Sleeve without insulation
cover
Sleeve with insulation cover
24 to 8 AWG
1.5 mm
2
to 10 mm
2
1.5 mm
2
to 6 mm
2
PZ 6/5
Insulator
Core
Stripped length
Twist and straighten the strands.
Loose and bent strands
