Mitsubishi Electric MELSERVO MR-JET-G Series, User Manual

Page: 37 / 164

1 SERVO PARAMETER DETAILS
1.3 Gain/filter setting servo parameters group ([Pr. PB_ _ ])
35
1
[Pr. PB17.2_Notch depth selection]
0: -40 dB
1: -14 dB
2: -8 dB
3: -4 dB
[Pr. PB18_Low-pass filter setting (LPF)]
Set the low-pass filter.
Refer to the table below for the status of this servo parameter and the setting values of the related servo parameter.
When [Pr. PA08.0 Gain adjustment mode selection] is set to "5" (quick tuning mode), this servo parameter returns to the initial
value.
89 342
8A 339
8B 336
8C 333
8D 330
8E 327
8F 324
90 321
91 318
92 315
93 313
94 310
95 307
96 305
97 302
98 300
99 297
9A 295
9B 292
9C 290
9D 288
9E 285
9F 283
Initial value Setting range Ver.
0h Refer to the text A4
Initial value Setting range Ver.
3141 [rad/s] 100 to 36000 A4
[Pr. PB23.1 Low-pass filter selection] [Pr. PB18 Low-pass filter setting]
"0" (initial value) Automatic setting
"1" Setting value enabled
"2" Setting value disabled
Setting value Frequency [Hz]