Mitsubishi Electric MELSERVO MR-JET-G Series, User Manual

Page: 71 / 164

1 SERVO PARAMETER DETAILS
1.5 I/O setting servo parameters group ([Pr. PD_ _ ])
69
1
[Pr. PD03_Input device selection 1 (*DI1)]
Select the device to be assigned to the input signal of the CN3 connector. The connector pin numbers to be assigned are as
follows.
[Pr. PD03.0-1_Device selection]
Refer to the following table for setting values.
[Pr. PD04_Input device selection 2 (*DI2)]
Select the device to be assigned to the input signal of the CN3 connector. The connector pin numbers to be assigned are as
follows.
[Pr. PD04.0-1_Device selection]
Refer to the following for setting values.

Page 69 [Pr. PD03_Input device selection 1 (*DI1)]
Initial value Setting range Ver.
0000000Ah Refer to the relevant detail No. Refer to the relevant detail No.
Model Axis Connector pin No. Initially assigned device
MR-JET-_G

CN3-2 LSP
Initial value Setting range Ver.
0Ah Refer to the text A4
Setting Input signal device
00 No assigned function
04 PC
0A LSP
0B LSN
0D CDP
22 DOG
40 CDP2
Initial value Setting range Ver.
0000000Bh Refer to the relevant detail No. Refer to the relevant detail No.
Model Axis Connector pin No. Initially assigned device
MR-JET-_G

CN3-12 LSN
Initial value Setting range Ver.
0Bh Refer to the text A4